|
Yonaka 92-00 Civic 2DR/4DR Catback Exhaust
|
|
Honda Civic 88-95 Performance Lightweight Rear Lower Control Arms
|
|
Honda S2000 2000-05 Race Radiator w/ Fan & Shroud
|
|
Our Price: $299.00
|
|
|
|
Our Price: $149.00
|
|
|
|
Our Price: $449.00
|
|
|
|
|
|
|
Direct bolt-on fit. Fully polished stainless steel, 60mm OD mandrel bended piping. All installation hardware included.
|
Designed to greatly improve the feel and response time of your vehicle.
|
100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit.
|
|
|
|
Honda Civic 92-00 Race Radiator w/ Fan & Shroud
|
|
Subaru WRX 01-07 Race Radiator w/ Fan & Shroud
|
|
Yonaka 94-01 Integra 2DR Catback Exhaust
|
|
Our Price: $449.00
|
|
|
|
Our Price: $449.00
|
|
|
|
Our Price: $299.00
|
|
|
|
|
|
|
100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit.
|
100% aluminum dual core lightweight radiator with aluminum end and shroud kit.
|
Direct bolt-on fit. Fully polished stainless steel, 60mm OD mandrel bended piping. All installation hardware included.
|
|
|
|
Yonaka Honda B16/B18 6-Puck Performance Clutch Disc
|
|
Mitsubishi Evo 7, 8, 9 01-07 Race Radiator w/ Fan & Shroud
|
|
Yonaka 88-91 Honda Civic Hatch Catback Exhaust
|
|
Our Price: $169.00
|
|
|
|
Our Price: $449.00
|
|
|
|
Our Price: $299.00
|
|
|
|
|
|
Will fit the following models:
1994-2001 Acura Integra LS/RS/GS/GS-R/Type-R (1.8L 4cyl DOHC)
1993-1995 Honda Civic (B16A)
1999-2000 Honda Civic Si (B16A)
1993-1997 Honda Del Sol Si (B16A)
All B Series Hydraulic Transmissions (+ 92-93 Cable Transmissions)
|
This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Mitsubishi Evo 7, 8 and 9 (01-07). A new radiator cap and drain plug are included. All cores are polished to a mirror finish.
|
Direct bolt-on fit. Fully polished stainless steel, 50mm OD mandrel bended piping. All installation hardware included.
|
|
|
|
Yonaka 92-95 Honda Civic Hatch (DX/Si) Catback Exhaust
|
|
Yonaka 96-00 Honda Civic Hatch (CX/DX) Catback Exhaust
|
|
Yonaka 1998-2002 Honda Accord (4-CYL) Catback Exhaust
|
|
Our Price: $299.00
|
|
|
|
Our Price: $299.00
|
|
|
|
Our Price: $299.00
|
|
|
|
|
|
|
Direct bolt-on fit. Fully polished stainless steel, 60mm OD mandrel bended piping. All installation hardware included.
|
Direct bolt-on fit. Fully polished stainless steel, 60mm OD mandrel bended piping. All installation hardware included.
|
Direct bolt-on fit. Fully polished stainless steel, 60mm OD mandrel bended piping. All installation hardware included.
|
|
|
|
Yonaka Honda D15/D16 6-Puck Performance Clutch Set
|
|
3" High Flow Catalytic Converter
|
|
Scion TC 2005+ Race Radiator w/ Fan & Shroud
|
|
Our Price: $349.00
|
|
|
|
Our Price: $169.00
|
|
|
|
Our Price: $449.00
|
|
|
|
|
|
Will fit the following models:
1988-1991 Honda Civic/CRX (1.5 D15, 1.6 D16)
1992-2000 Honda Civic (1.5 D15, 1.6 D16)
1993-1995 Honda Del Sol (1.5 D15, 1.6 D16)
2001-2005 Honda Civic (1.7 D17)
|
3" High Flow Catalytic Converter
|
This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Scion TC 2005+. A new radiator cap and drain plug are included. All cores are polished to a mirror finish.
|
|
|
|
2.5" High Flow Catalytic Converter
|
|
2.0" Stainless Steel Straight Pipe (3' section)
|
|
2.5" Stainless Steel Straight Pipe (3' section)
|
|
Our Price: $149.00
|
|
|
|
Our Price: $59.00
|
|
|
|
Our Price: $79.00
|
|
|
|
|
|
|
2.5" High Flow Catalytic Converter
|
304 stainless steel - 1.5mm thick - 1000mm long (3 ft) Fully Polished
|
304 stainless steel - 1.5mm thick - 1000mm long (3 ft) Fully Polished
|
|
|
|
3.0" Stainless Steel Straight Pipe (3' section)
|
|
4.0" Stainless Steel Straight Pipe (3' section)
|
|
Nissan 240SX 89-94 (SR20) Race Radiator w/ Fan & Shroud
|
|
Our Price: $99.00
|
|
|
|
Our Price: $119.00
|
|
|
|
Our Price: $449.00
|
|
|
|
|
|
|
304 stainless steel - 1.5mm thick - 1000mm long (3 ft) Fully Polished
|
304 stainless steel - 1.5mm thick - 1000mm long (3 ft) Fully Polished
|
This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Nissan 240SX with the SR20 engine swap. A new radiator cap and drain plug are included. All cores are polished to a mirror finish.
|
|
|
|
Yonaka Stainless Steel 2.5" Inlet/4.0" Outlet Angled Cut Exhaust Tip
|
|
Yonaka Stainless Steel 2.25" Inlet/4" Outlet Angled Cut Exhaust Tip (Resonated)
|
|
Yonaka 2.5" Inlet/Outlet Crossover X Pipe
|
|
Our Price: $89.00
|
|
|
|
Our Price: $89.00
|
|
|
|
Our Price: $159.00
|
|
|
|
|
|
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 4.0" outlet tip with a 2.5" inlet on the collector side. The total length is 10".
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 4.0" outlet tip with a 2.25" inlet on the collector side. The total length is 11.5".
|
This x pipe tip is fully polished 304 stainless steel. The total length is 12" and the width is 7".
|
|
|
|
Yonaka Stainless Steel 2.5" Inlet/3.5" Outlet Angled Cut Exhaust Tip
|
|
Yonaka Stainless Steel 2.25" Inlet/4" Outlet Straight Cut Exhaust Tip
|
|
Yonaka Stainless Steel 2.25" Inlet/3X4" Outlet Oval Straight Cut Exhaust Tip
|
|
Our Price: $89.00
|
|
|
|
Our Price: $89.00
|
|
|
|
Our Price: $89.00
|
|
|
|
|
|
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 3.5" outlet tip with a 2.5" inlet on the collector side. The total length is 7", with an angled cut of 20 degrees.
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 4" double walled, rolled outlet tip with a 2.25" inlet on the collector side. The total length is 9".
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 3X4" double walled, rolled, resonated, oval outlet tip with a 2.25" inlet on the collector side. The total length is 9.5".
|
|
|
|
Yonaka Stainless Steel 2.25" Inlet/3X4.5" Outlet Angled Cut Oval Exhaust Tip
|
|
Yonaka Stainless Steel 2.25" Inlet/3.25X4.25" Outlet Angled Cut Exhaust Tip
|
|
Yonaka Stainless Steel 2.5" Inlet/3.5" Outlet Angled Cut Exhaust Tip
|
|
Our Price: $89.00
|
|
|
|
Our Price: $89.00
|
|
|
|
Our Price: $89.00
|
|
|
|
|
|
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 3X4.5" 20 degree angled cut, double walled, rolled, resonated, oval outlet tip with a 2.25" inlet on the collector side. The total length is 9".
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 3.25X4.25" 20 degree angled cut, rounded outlet tip with a 2.25" inlet on the collector side. The total length is 9".
|
This exhaust tip is fully polished 304 stainless steel. Featuring a 3.5" 45 degree angled cut outlet tip with a 2.5" inlet on the collector side. The total length is 18".
|
|
|
